Garage Door Cable Repair in Severance, CO | Garage Door USA
from $149
Garage Door Garage Door Cable Repair Severance, CO
Lift-cable replacement, drum re-spooling, and tension recalibration. We pair new cables with a spring inspection so the door is safe and balanced before we leave.
Garage Door Garage Door Cable Repair Severance, CO
Garage Door Cable Repair for Severance homeowners means fast dispatch across Severance and the surrounding area. Because of extreme summer heat that bakes and warps lightweight steel panels, intense UV that embrittles rubber gaskets and bottom seals, and heat-soak that fatigues torsion springs years early, we recommend corrosion-resistant hardware on local garage door cable repair jobs.
Our Severance recommendations are climate-driven. With a high, dry climate of intense summer heat, sharp overnight cooling, and very little annual precipitation, your door contends with extreme summer heat that bakes and warps lightweight steel panels, intense UV that embrittles rubber gaskets and bottom seals, and heat-soak that fatigues torsion springs years early — which is why galvanized hardware and quality weatherstripping pay off here.
There's a familiar rhythm to Severance breakdowns — heat-warped panels on west-facing steel doors, noisy operation from grit-packed, under-lubricated rollers, dried, cracked bottom seals that let dust into the garage, and dust-blinded photo-eye safety sensors. We've fixed each a thousand times across Weld County.
Lift cables transfer the spring's stored energy to the door panels — they're under high tension every cycle and degrade slowly through fraying, corrosion, and mis-spooling on the drum. A cable repair visit replaces both cables (always replace as a pair so the door stays balanced), re-spools the drums to the correct number of wraps, recalibrates spring tension to match, and inspects related components like the bottom bracket where one end of each cable terminates.
Cables are galvanized aircraft-grade steel — typically 1/8-inch diameter for residential doors and 3/16-inch for heavier or commercial doors. We carry both diameters along with the bottom-bracket fittings, drum caps, and shaft set-screws that occasionally need replacement alongside the cables.
Cable failure usually leaves the door off-track or hanging crooked. Continuing to operate the opener after one cable has snapped causes the other side to take the full load and is the fastest way to bend tracks or damage panels. Stop the opener and call for repair when you see a frayed or snapped cable — fast service is standard.
Strands of steel poking out of the cable indicate active wear. Cables don't self-heal — frays accelerate to snap.
Door hangs crooked when closed
If one corner is higher than the other when the door is fully down, one cable has stretched, slipped on the drum, or partially failed.
Snapped cable, door stuck
A fully snapped cable leaves the door off-track or jammed. Don't try to force it — call for repair.
Rust streaks on cables
Coastal homes see cable corrosion progress until the strands weaken. Visible rust means the cable is no longer at full strength.
Loud bang followed by crooked door
Cable snap sounds similar to spring snap but is usually quieter. If the door is crooked after the noise, suspect cable failure.
Common causes & what we fix
Mis-spooled drum
When a cable jumps off its drum groove, it crosses over itself and wears at the crossover point. Re-spooling fixes the spool but the wear point becomes the weak link.
Drum cap or set-screw failure
If the drum slips on the shaft, one cable unwinds while the other tries to hold. This sudden imbalance can snap the loaded cable.
Bottom bracket failure
The bracket where the cable attaches at the door bottom occasionally cracks or pulls free, letting the cable whip free under tension.
Coastal corrosion
Salt-air pitting on uncoated cables can drop tensile strength 30–40% over 10+ years. Galvanized aircraft cables resist this far better.
Spring imbalance
An over- or under-tensioned spring puts uneven load on the cables and accelerates wear on the loaded side.
Our process
1
Call or schedule online. Request garage door cable repair in Severance and choose a 2-hour arrival window. A confirmation with your technician's name and photo lands in under five minutes.
2
On-site diagnosis. The garage door cable repair diagnosis happens at your door: free for most repairs, a $39 fee on minor service calls that's waived the moment you approve the work. Nothing begins until you've seen it.
3
Flat-rate quote. The garage door cable repair quote is flat-rate, written, and locked before work starts. Salaried techs mean no upsell pressure and no hourly creep on the invoice.
4
Same-visit fix. Same-visit completion is the norm for garage door cable repair: 96% of calls are fixed first time. We run the door with you to verify, then tidy up everything we touched.
How much does garage door cable repair cost in Severance, CO?
The cost of garage door cable repair in Severance starts at $149, locked in as a flat written rate before work begins. No commissioned up-sell, no hourly creep — and 10% off labor for seniors and military. Affordable garage door cable repair in Severance, CO doesn't mean cut corners: it's a fair, fixed price, with seniors and military saving 10%.
Garage Door Cable Repair the United States starts at from $149, your written garage door cable repair quote is flat-rate and fixed before any work — no add-ons creep in, no hourly meter runs. Seniors (65+) and military earn 10% off labor, and Synchrony covers anything over $1,500 at 0% APR for the first year, fast approval, no prepayment penalty.
Why homeowners in Severance, CO choose us for garage door cable repair
Severance chooses us for garage door cable repair because we treat Weld County like home turf. Trucks stocked for local failure modes, written flat-rate quotes good for 30 days, and a 10-year guarantee on everything we install or repair. Looking for a garage door cable repair company in Severance, CO? That's exactly what we are — local, licensed, and accountable to Weld County.
Severance garage door cable repair comes with a 10-year workmanship guarantee, separate from any parts warranty the manufacturer offers. If our garage door cable repair fails on its installation, we return and repair it free for a full decade. Springs rated to 30,000 cycles are warrantied for the original homeowner's lifetime; other parts carry standard 1–5 year terms.
With garage door cable repair, we quote what you actually need and nothing more. Salaried (never commissioned) techs mean no pressure to oversell, and the diagnostic walks you through exactly what we see — the failing parts and the healthy ones. Repair when repair makes sense, replace only when the economics favor it, and the written flat-rate garage door cable repair quote holds for 30 days.
Areas we serve for garage door cable repair
We provide garage door cable repair throughout Severance, CO and the surrounding Weld County area. Serving Severance and surrounding neighborhoods.
Severance is one of many Weld County communities we handle garage door cable repair for. Severance lies within Weld County, in Colorado.
Severance sits close to Windsor, Timnath, Ault, and Eaton, and we treat the whole cluster as one garage door cable repair area — the same licensed crew from any of them. Local garage door cable repair in Severance, CO and ZIP 80650 — same crew, same flat rate, no travel surcharge for the edges of town.
Garage Door Cable Repair near you in Severance, CO
Want garage door cable repair near you in Severance? We're it — and "near" isn't marketing: our routes cover Severance and the surrounding area daily, so the closest licensed tech is usually minutes, not hours, from your door.
Severance is part of our greater Fort Collins, CO metro service area.
ZIP codes 80650, 80546, 80550, 80610 and their surroundings are covered for garage door cable repair. Travel time for garage door cable repair tracks Severance traffic and time of day, so the accurate ETA comes when you phone in. Calls route directly to an on-call technician — no phone tree, no voicemail. "Local garage door cable repair near me" in Severance should mean a tech who already works your street — with us it does.
Frequently asked about garage door cable repair
Top questions homeowners searching for Garage Door Cable Repair near me ask us:
Local weather drives most of the repairs we run in Severance: with high and extreme summer heat that bakes and warps lightweight steel panels, intense UV that embrittles rubber gaskets and bottom seals, and heat-soak that fatigues torsion springs years early, the common failure modes are heat-warped panels on west-facing steel doors, noisy operation from grit-packed, under-lubricated rollers, dried, cracked bottom seals that let dust into the garage, and dust-blinded photo-eye safety sensors. Our Severance trucks stock the parts those conditions wear out first, so most jobs are a single visit.
Severance's housing skews new — a median build year of 2009, only 9% built before 1980 — so most doors are first-generation: the common work is tune-ups, spring break-in, and opener setup rather than rust repair.
Cables on a balanced door wear at the same rate. The second cable is days to weeks behind the first. Replacing both at once is faster, cheaper than two visits, and properly re-balances the door.
5 years on cables and drums. 10-year workmanship on the install. Galvanized cables in coastal homes typically last well beyond it.
No — running the opener with a failed cable bends tracks and risks the door coming off the rail entirely. Disconnect the opener and avoid using the door until repair.
Most cable jobs run 45–60 minutes including spring tension verification and balance test. Add 15 minutes if drums also need replacement.